An introduction to four must-know paint maintenance methods for automotive stamping parts

2024-04-30 08:10:19

1. Waxing

A wax film is formed on the surface of the car paint to inhibit the oxidation of harmful external components on the car paint. It is resistant to ultraviolet rays, has high brightness and is cheap. Generally, after purchasing car wax at a car beauty shop, the beauty shop will be responsible for free waxing. A box of wax can be used for several months.

Disadvantages: The protection time is very short, usually only 4 to 5 days at a time. It will lose its effect if washed during car washing. The main disadvantage is that the wax contains silicon, which has an oxidizing effect on the car paint. It is recommended that new cars should not be sanded and waxed as much as possible. The main function of sand wax is to remove small scratches and dirt on the surface of car paint.

2. Glaze sealing

Glaze sealing can increase the strength of the car paint, prevent small scratches caused by wind and sand hitting the car body, and resist high temperatures and ultraviolet rays. The retention time is relatively long, up to 1 to 3 months, and it has a substantial protective effect on the paint surface, making the car paint feel delicate and soft.

Disadvantages: Glaze is a compound extracted from petroleum, which is very harmful to car paint. High-frequency polishing during glaze sealing will cause damage to the car's paint surface. In addition, the protection time is shorter than the coating time.

3. Coating

Hardened coating is a high-level measure for paint surface protection. It can avoid oxidation and achieve multiple functions such as brightening the paint surface, resisting acids and alkalis, resisting oxidation, and resisting ultraviolet rays. Since the material of the hardened coating itself is an inorganic substance, it will not damage the car paint. Generally, when coating a car, the paint that has become discolored and brittle due to aging and the oxide layer formed by years of corrosion will be removed at the same time. It can increase the hardness of paint surface and avoid small scratches and halo. The retention time is also longer, about 1 year. Nowadays, the good coating effects are good, but you should avoid some low-quality and low-price products. The coating effect is good, and now coated products have occupied the waxing and glazing market.

4. Crystal plating

Crystal plating forms a layer of powerful protective crystals and UV filters on the paint surface of automobile stamping parts. It can improve the brightness and hardness of the paint surface, prevent scratches, and protect against UV rays, acid rain, salt, asphalt, flying paint, insect spots, and yellow sand. The infiltration of harmful substances such as bird droppings and bird droppings on the car surface is like putting a high-tech "protective coat" on the car paint, which completely isolates any erosion of the car paint itself by dust, oil, mold, water molecules and other particles. It also has the functions of UV resistance, oxidation resistance, friction resistance, non-fading, and increasing the hardness of the paint surface, so that the paint surface can maintain its original bright and bright color for a long time.

At the same time, it has the following characteristics: It can isolate the combination of air and car paint, just like an invisible car coat for the car paint, providing reliable paint sealing technology, efficient and long-lasting protection of the car paint, and preventing environmental damage to the color of the car paint. Influence. It is currently the world's leading automotive paint maintenance technology.